Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel with Variphase

The Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel with Variphase Control is designed for studio recording, live recording, and live performance applications.
AED 3,841.00

In stock

Product Description

The Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel with Variphase Control is designed for studio recording, live recording, and live performance applications. This portable combination preamplifier and direct box is encased in a rugged chassis and features two channel operation, variphase control, silk control, single-knob compression and the ability to blend both microphone and instrument channels. 

The front panel of the chassis features a 1/4" instrument input as well as a 1/4" Thru for connecting to an instrument amplifier. The instrument gain knob allows you to control the DI signal level from 0 to 30 dB and the microphone gain knob provides up to 66 dB of gain in 6 dB increments. A rear panel phantom power switch enables use with condenser microphones and a high pass filter button reduces signals below 80 Hz by 12 dB/octave to remove building rumble and other environmental noise. A phase invert button reverses the polarity of the microphone input.

The compressor features an adjustable threshold between -20 and +10 with a fixed ratio of 1:2 and an adjustable time attack and release time constant from standard to fast via an internal jumper. A second internal jumper allows the compressor to be assigned to the DI chain. 

The variphase button and phase sweep knob allow you to incrementally adjust the phase angle of the two sources for aligning sources such as overhead and drum mics or the direct and amplified signals from a bass guitar and bass cabinet. The middle blend button allows you to mix the DI and Mic signals together, while the silk button adds nostalgic warmth and presence to both outputs. 

The back of the unit features an XLR-3F mic input, a 1/4" mic output, a XLR-3F line ouptut, a +48V phantom power switch, a ground lift switch, and a 12 VDC power button.


 
Product Specs

Phantom Power +48 VDC ±1%
Crosstalk Measured Channel to Channel: Better than -90 dB @ 15 kHz
Total Harmonic Distortion/Noise At 1 kHz, +20 dBu Output: Main Output: Better than 0.001%
At 20 Hz, +20 dBu Output: Main Output: Better than 0.002%
Silk Engaged: Better than 0.2% second harmonic
Maximum Output Level Maximum output from 20 to 40 kHz is +23 dBu
Noise Measured at Main Output, unweighted, 22 Hz to 22 kHz, terminated 150 ohms. With gain at unity better than -100 dBu, with gain at 66 dB better than -62 dBu, Equivalent Input Noise better than -128 dBu, Noise Factor of 1.5 dB
Frequency Response Main Output, no load, -0.2 dB @ 10 Hz , -3 dB @ 160 kHz
Dimensions (W x H x D) 6.5 x 2.0 x 7.5" (16.5 x 5.0 x 19.0 cm)
Weight 5 lb (2.3 kg)
Packaging Info
Package Weight 5.95 lb
Box Dimensions (LxWxH) 14.2 x 12.1 x 5.9"

Additional Information

Weight (Kg) 5.0000
Manufacturer Rupert Neve

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.